Multi-Tech Systems 410, MVP103 Call Details Field Definitions, Conference will have the same CID

Chapter 3 – Related MultiVOIP Setup Parameters

A Call Details screen for a call in progress can be launched either by clicking on the “Call Details” button for a selected call in the Current Calls screen, or by double-clicking on a selected call listed in the Current Calls screen. The Call Details screen contains general information about the call, as well as details about the call’s source endpoint and destination endpoint.

Clicking on an in-progress call, or using the “Call Details” button, yields full details about the call

The Call Details screen consists of three panes: Call General Info, Destination Info, and Source Info. We describe the fields for each of these panes in a separate table below.

		Call Details Field Definitions
Field Name	Values	Description
Call General Info
Call No.		Call Number. Accession number identifying a call in progress.
Cid Sum		The conference ID number (CID) is a unique non-zero value created
		by the calling endpoint and passed in various H.225.0 messages. The
		CID identifies the conference with which the message is associated.
		Therefore, messages from all endpoints participating in the same
		conference will have the same CID.
Call ID Sum		The call ID number is a globally unique non-zero value created by the
		calling endpoint and passed in various H.225.0 messages. The Call
		ID identifies the call with which the message is associated.
Call Model	direct	Indicates whether the call is direct or routed.
	OR	For direct-mode calls, the gatekeeper gives each endpoint involved in the call
		the destination address of the other and establishes a common call-signaling
	routed
		channel for them to use during the call. Then the two endpoints conduct the
		call without further gatekeeper involvement.
		For routed-mode calls, the gatekeeper establishes a connection between the
		two endpoints but keeps itself involved in call signaling for the duration of
		the call. In routed mode, the gatekeeper keeps a call-signaling channel open
		for the entire duration of the call. As a call-management service, the
		gatekeeper can change the routing of the call (by line hunting) while the calls
		is in progress. If the gatekeeper is to implement supplementary (H.450)
		services, it must operate in routed mode.

56 Multi-Tech Systems, Inc. Avaya Communication Manager Guide