ICE & CH~LED WATER DISPENSER
(continued)
When Dispensing Ice...
Some crushed ice may be dispensed even though you selected CUBED. This happens occasionally when a few cubes accidentally get channeled to the crusher.
Sometimes a mound of snow will form on the door in the ice chute. This condition is normal, and usually occurs when you have dispensed crushed ice repeatedly. The snow will eventually evaporate.
When Dispensing Water...
The water system provides approximately six
successive
The first glass of water dispensed maybe warmer than the following ones. This is normal.
Dispensed water is chilled, not iced. For colder water, simply add crushed ice or cubes before dispensing water.
To Stop Dispensing
Release uressure from cradle and withdraw slowly |
| ~ |
| ||||
|
|
|
|
| |||
to catch ~ast bits of ice or drops of water. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some slight dripping may occur following dispensing of crushed ice or chilled water. If excessive, the spill should be wiped dry immediately.
Do not pour water in spill shelf because it is not
,!
If Ice Clumps Form in Storage Bin...
The icemaker ejects cubes in groups of eight, and it is normal for several cubes to be joined together.
However, infrequent usage of ice can cause ice clumps to form in the storage bin, resulting in temporary malfunction of the dispenser mechanism.
If this happens:
●Remove storage bin from freezer compartment.
●Break up ice clumps with fingertip pressure and discard remaining clumps.
●Replace bin before remaining cubes melt and fuse together.
To Remove Ice Cube Storage Bin
Lift the left corner to free the bin from the shelf, and pull the bin straight out while supporting it at front and back.
\
$
