Audiovox ACD-70 CD Changer Controls / CD Changer Error Codes, Du DISC/TRACK Repeat Play RPT

Scan mode will also be canceled by			RND indication will appear on the display
activating another disc function (Top, Repeat			panel and the tracks on the disc will be
or Random Play).			played in a random, shuffled order. The Track
du DISC/TRACK REPEAT PLAY (RPT)			Select button dr will also select tracks in
			the shuffled order instead of the normal
When the Repeat button is pressed, the RPT			progression. The Random Track mode can
indication will appear on the display panel			be canceled by pressing the Random button
and play of the selected track will be			again or by activating the Disc Select dq,
continually repeated until the Track Repeat			Scan dt or Repeat Play dufunctions.
mode is canceled by pressing the Repeat			When the Random button is pressed again,
button again or by activating the Disc Select			the	DISC	and RND indications will appear
dq, Scan dt or Random Play el functions.			on	the display panel and the discs in the
When the Repeat button is pressed twice			magazine will be played in a random, shuffled
the		and RPT indications will appear	order, as well as the tracks on each disc.
	DISC
on the display panel and play of the selected			After playing a track selected at random from
disc will be continually repeated until the Disc			a disc in the magazine, the unit will select
Repeat mode is canceled by pressing the			another disc at random and play a randomly
Repeat button again or by activating the			selected track on it. This will continue until
			the Random Disc mode is canceled by
Scan dt or Random Play elfunctions.			pressing the Random button again or by
el DISC/TRACK RANDOM PLAY (RND)
			activating the Scan dt or Repeat Play du
When the Random button is pressed, the			functions.

CD CHANGER ERROR CODES

If a problem should develop while operating the CD changer, the following error codes may appear on the display panel.

ER-1:Indicates that there is no magazine loaded in the CD changer.

ER-2:Indicates a problem with the magazine eject function.

ER-3:Indicates an error in the disc loading function.

ER-4:Indicates an error in the disc un-loading function.

ER-5:Indicates an error in the magazine position.

ER-6:Indicates an error in the laser pick-up position.

ER-7:Indicates an error in the laser focus on the disc.

In any of the above situations, try ejecting the CD magazine from the changer and make sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual of the CD changer). Re-load the magazine and check for proper operation. You may also try activating the RESET button dmon the unit, but this will also erase the time and pre-set memories.

If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.

CD CHANGER CONTROLS / CD CHANGER ERROR CODES

14