D-Link TM DES-6500 manual Show snmp engineID, Config snmp engineID snmpengineID

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

Example usage:

To display the currently entered SNMP community strings:

DES-6500:4#show snmp community

Command: show snmp community

SNMP Community Table
Community Name	View Name	Access Right
------------------------------	------------------------------	------------
dlink	ReadView	read_write
private	CommunityView	read_write
public	CommunityView	read_only

Total Entries: 3

DES-6500:4#

config snmp engineID

Purpose	Used to configure a name for the SNMP engine on the Switch.
Syntax	config snmp engineID <snmp_engineID>
Description	The config snmp engineID command configures a name for the
	SNMP engine on the Switch.
Parameters	<snmp_engineID> − An alphanumeric string that will be used to
	identify the SNMP engine on the Switch.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To give the SNMP agent on the Switch the name “0035636666”

DES-6500:4#config snmp engineID 0035636666

Command: config snmp engineID 0035636666

Success.

DES-6500:4#

show snmp engineID

Purpose	Used to display the identification of the SNMP engine on the
	Switch.
Syntax	show snmp engineID
Description	The show snmp engineID command displays the identification of
	the SNMP engine on the Switch.
Parameters	None.
Restrictions	None.

Example usage:

39