D-Link TM DES-6500 manual Show arpentry ipaddress ipaddr

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

show arpentry

	Parameters		ipif <ipif_name 12> − Enter the IP interface name for which to
			display ARP settings.
			static − Displays the static entries to the ARP table.
	Restrictions		None.
Example Usage:
To display the ARP table:
		DES-6500:4#show arpentry
		Command: show arpentry
		ARP Aging Time : 30
		Interface	IP Address	MAC Address	Type
		-------------	---------------	-----------------	---------------
		System	10.0.0.0	FF-FF-FF-FF-FF-FF	Local/Broadcast
		System	10.1.1.169	00-50-BA-70-E4-4E	Dynamic
		System	10.1.1.254	00-01-30-FA-5F-00	Dynamic
		System	10.9.68.1	00-A0-C9-A4-22-5B	Dynamic
		System	10.9.68.4	00-80-C8-2E-C7-45	Dynamic
		System	10.10.27.51	00-80-C8-48-DF-AB	Dynamic
		System	10.11.22.145	00-80-C8-93-05-6B	Dynamic
		System	10.11.94.10	00-10-83-F9-37-6E	Dynamic
		System	10.14.82.24	00-50-BA-90-37-10	Dynamic
		System	10.15.1.60	00-80-C8-17-42-55	Dynamic
		System	10.17.42.153	00-80-C8-4D-4E-0A	Dynamic
		System	10.19.72.100	00-50-BA-38-7D-5E	Dynamic
		System	10.21.32.203	00-80-C8-40-C1-06	Dynamic
		System	10.40.44.60	00-50-BA-6B-2A-1E	Dynamic
		System	10.42.73.221	00-01-02-03-04-00	Dynamic
		System	10.44.67.1	00-50-BA-DA-02-51	Dynamic
		System	10.47.65.25	00-50-BA-DA-03-2B	Dynamic
		System	10.50.8.7	00-E0-18-45-C7-28	Dynamic
		System	10.90.90.90	00-01-02-03-04-00	Local
		System	10.255.255.255 FF-FF-FF-FF-FF-FF		Local/Broadcast
		Total Entries = 20
		DES-6500:4#

show arpentry ipaddress

Purpose	Used to display a specific IP address located in the ARP table.
Syntax	show arpentry ipaddress <ipaddr>
Description	This command is used to display the current settings of a specific
	IP address located in the ARP table.
Parameters	<ipif_name 12> − The name of the IP interface the end node or
	station for which the ARP table entry was made, resides on.
Restrictions	None.

Example usage:

259