
xStack
config syslog host all
severity − Severity level indicator, as described below:
Bold font indicates that the corresponding severity level is currently supported on the Switch.
Numerical Severity Code
0Emergency: system is unusable
1Alert: action must be taken immediately
2Critical: critical conditions
3Error: error conditions
4Warning: warning conditions
5Notice: normal but significant condition
6Informational: informational messages
7Debug:
informational − Specifies that informational messages will be sent to the remote host. This corresponds to number 6 from the list above.
warning − Specifies that warning messages will be sent to the remote host. This corresponds to number 4 from the list above.
all − Specifies that all of the currently supported syslog messages that are generated by the Switch will be sent to the remote host.
facility − Some of the operating system daemons and processes have been assigned Facility values. Processes and daemons that have not been explicitly assigned a Facility may use any of the "local use" facilities or they may use the
Numerical Facility Code
0kernel messages
1
2mail system
3system daemons
4security/authorization messages
5messages generated internally by syslog
6line printer subsystem
7network news subsystem
8UUCP subsystem
9clock daemon
10security/authorization messages
11FTP daemon
12NTP subsystem
13log audit
14log alert
15clock daemon
16local use 0 (local0)
17local use 1 (local1)
18local use 2 (local2)
19local use 3 (local3)
20local use 4 (local4)
21local use 5 (local5)
22local use 6 (local6)
23local use 7 (local7)
70