xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

config 802.1p user_priority

4

4

5

5

6

6

7

6

Parameters

<priority 0-7>Specifies which of the eight 802.1p priority tags (0

 

through 7) to map to one of the Switch’s hardware priority classes

 

of service (<class_id>, 0 through 6).

 

<class_id 0-6>Specifies to which of the Switch’s hardware

 

priority classes of service the 802.1p priority tags (specified

 

above) will be mapped.

Restrictions

Only administrator-level users can issue this command.

Example usage:

To configure 802.1 user priority on the Switch:

DES-6500:4# config 802.1p user_priority 1 3

Command: config 802.1p user_priority 1 3

Success.

DES-6500:4#

show 802.1p user_priority

Purpose

Used to display the current 802.1p user priority tags to hardware

 

priority class of service mapping in use by the Switch.

Syntax

show 802.1p user_priority

Description

The show 802.1p user_priority command will display the current

 

802.1p user priority tags to hardware priority classes of service

 

mapping in use by the Switch.

Parameters

None.

Restrictions

None.

 

 

Example usage:

To show 802.1p user priority:

DES-6500:4# show 802.1p user_priority

Command: show 802.1p user_priority

COS Class of Traffic

Priority-0 -> <Class-2>

Priority-1 -> <Class-0>

Priority-2 -> <Class-1>

Priority-3 -> <Class-3>

Priority-4 -> <Class-4>

Priority-5 -> <Class-5>

Priority-6 -> <Class-6>

Priority-7 -> <Class-6>

DES-6500:4#

108

Page 111
Image 111
D-Link TM DES-6500 manual Show 802.1p userpriority