D-Link TM DES-6500 manual Delete syslog host index 1-4 all, Show syslog host index

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

delete syslog host

Purpose	Used to remove a syslog host, that has been previously
	configured, from the Switch.
Syntax	delete syslog host [<index 1-4> all]
Description	The delete syslog host command is used to remove a syslog
	host that has been previously configured from the Switch.
Parameters	<index 1-4>− Specifies that the command will be applied to an
	index of hosts. There are four available indexes, numbered 1
	through 4.
	all − Specifies that all syslog hosts will be deleted.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To delete a previously configured syslog host:

DES-6500:4#delete syslog host 4

Command: delete syslog host 4

Success.

DES-6500:4#

show syslog host

Purpose	Used to display the syslog hosts currently configured on the
	Switch.
Syntax	show syslog host {<index 1-4>}
Description	The show syslog host command is used to display the syslog
	hosts that are currently configured on the Switch.
Parameters	<index 1-4>− Specifies that the command will be applied to an
	index of hosts. There are four available indexes, numbered 1
	through 4.
Restrictions	None.

Example usage:

To show syslog host information:

DES-6500:4#show syslog host

Command: show syslog host

Syslog Global State: Disabled
Host Id Host IP Address		Severity	Facility	UDP port	Status
-------	---------------	--------------	--------	--------	--------
1	10.1.1.2	All	Local0	514	Disabled
2	10.40.2.3	All	Local0	514	Disabled
3	10.21.13.1	All	Local0	514	Disabled

Total Entries : 3

DES-6500:4#

72