
xStack
Command | Parameters |
|
|
create access_profile | profile_id <value |
| destination_mac <macmask> 802.1p ethernet_type} |
|
|
config access_profile | <value |
profile_id | <vlan_name 32> source_mac <macaddr> destination_mac |
| <macaddr> 802.1p <value |
| port <port> [permit {priority <value |
| replace_dscp <value |
create access_profile | profile_id <value |
| destination_ip_mask <netmask> dscp [icmp {type code} igmp |
| {type} tcp {src_port_mask <hex |
| |
| {src_port_mask <hex |
| protocol_id {user _mask <hex |
config access_profile | <value |
profile_id | 32> source_ip <ipaddr> destination_ip <ipaddr> dscp <value |
| |
| {type <value |
| <value |
| <value |
| 0 - 255> {user_define <hex |
| {priority <value |
| 63>} deny] delete <value |
|
|
create access_profile | profile_id <value |
| |
| 0xffffffff> |
| <hex |
| 0xffffffff> <hex |
| 0xffffffff> |
| <hex |
| 0xffffffff> <hex |
| 0xffffffff>} |
|
|
config access_profile | <value |
profile_id | |
| 0xffffffff> <hex |
| <hex |
| |
| 0xffffffff> <hex |
| <hex |
| |
| 0xffffffff> |
| 7> {replace_priority} replace_dscp <value |
| <value |
|
|
create access_profile | profile_id <value |
| <ipv6mask> destination_ipv6_mask <ipv6mask>}] |
|
|
config access_profile | <value |
profile_id | 255> flowlabel <hex |
| destionation_ipv6 <ipv6addr>} port <port> [permit {priority <value |
|
Each command is listed, in detail, in the following sections.
212