![](/images/new-backgrounds/1202185/202185271x1.webp)
xStack
show lacp_port
Purpose | Used to display current LACP port mode settings. |
Syntax | show lacp_port {<portlist>} |
Description | This command will display the LACP mode settings as they are |
| currently configured. |
Parameters | <portlist> - Specifies a range of ports that will be displayed. The port |
| list is specified by listing the lowest slot number and the beginning |
| port number on that slot, separated by a colon. Then the highest slot |
| number, and the highest port number of the range (also separated |
| by a colon) are specified. The beginning and end of the port list |
| range are separated by a dash. For example, 1:3 specifies slot |
| number 1, port 3. 2:4 specifies slot number 2, port 4. |
| specifies all of the ports between slot 1, port 3 and slot 2, port 4 − in |
| numerical order. |
Restrictions | Only |
|
|
Example usage:
To display LACP port mode settings:
Command: show lacp_port
Port | Activity |
1:1 | Active |
1:2 | Active |
1:3 | Active |
1:4 | Active |
1:5 | Active |
1:6 | Active |
1:7 | Active |
1:8 | Active |
133