D-Link TM DES-6500 manual Create snmp host ipaddr v1 v2c v3 noauthnopriv

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

ReadView Name		: restricted
WriteView Name		:
Notify View Name		: restricted
Security Model		: SNMPv3
Security Level		: NoAuthNoPriv
Group	Name	: ReadGroup
ReadView Name		: CommunityView
WriteView Name		:
Notify View Name		: CommunityView
Security Model		: SNMPv1
Security Level		: NoAuthNoPriv
Group	Name	: ReadGroup
ReadView Name		: CommunityView
WriteView Name		:
Notify View Name		: CommunityView
Security Model		: SNMPv2
Security Level		: NoAuthNoPriv
Group	Name	: WriteGroup
ReadView Name		: CommunityView
WriteView Name		: CommunityView
Notify View Name		: CommunityView
Security Model		: SNMPv1
Security Level		: NoAuthNoPriv
Group	Name	: WriteGroup
ReadView Name		: CommunityView
WriteView Name		: CommunityView
Notify View Name		: CommunityView
Security Model		: SNMPv2
Security Level		: NoAuthNoPriv

Total Entries: 10

DES-6500:4#

create snmp host

Purpose	Used to create a recipient of SNMP traps generated by the
	Switch’s SNMP agent.
Syntax	create snmp host <ipaddr> [v1 v2c v3 [noauth_nopriv
	auth_nopriv auth_priv]] <auth_string 32>

Description

Parameters

The create snmp host command creates a recipient of SNMP traps generated by the Switch’s SNMP agent.

<ipaddr> − The IP address of the remote management station that will serve as the SNMP host for the Switch.

v1 – Specifies that SNMP version 1 will be used. The Simple Network Management Protocol (SNMP), version 1, is a network management protocol that provides a means to monitor and control network devices.

v2c – Specifies that SNMP version 2c will be used. The SNMP v2c supports both centralized and distributed network management strategies. It includes improvements in the Structure

43