D-Link TM DES-6500 manual Enable, Disable

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

Command	Parameters
statistics
show auth_statistics	{ports [<portlist> all]}

Each command is listed, in detail, in the following sections.

enable 802.1x

Purpose	Used to enable the 802.1x server on the Switch.
Syntax	enable 802.1x
Description	The enable 802.1x command enables the 802.1x Network
	Access control server application on the Switch. To select
	between port-based or MAC-based, use the config 802.1x
	auth_mode command.
Parameters	None.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To enable 802.1x switch wide:

DES-6500:4#enable 802.1x

Command: enable 802.1x

Success.

DES-6500:4#

disable 802.1x

Purpose	Used to disable the 802.1x server on the Switch.
Syntax	disable 802.1x
Description	The disable 802.1x command is used to disable the 802.1x
	Network Access control server application on the Switch. To
	select between port-based or MAC-based, use the config
	802.1x auth_mode command.
Parameters	None.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To disable 802.1x on the Switch:

DES-6500:4#disable 802.1x

Command: disable 802.1x

Success.

DES-6500:4#

191