D-Link TM DES-6500 manual Config ssl cachetimeout, Show ssl cachetimeout

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

config ssl cachetimeout

Purpose	Used to configure the SSL cache timeout.
Syntax	config ssl cachetimeout timeout <value 60-86400>
Description	This command will set the time between a new key exchange
	between a client and a host using the SSL function. A new SSL
	session is established every time the client and host go through a
	key exchange. Specifying a longer timeout will allow the SSL
	session to reuse the master key on future connections with that
	particular host, therefore speeding up the negotiation process.
Parameters	timeout <value 60-86400>- Enter a timeout value between 60 and
	86400 seconds to specify the total time an SSL key exchange ID
	stays valid before the SSL module will require a new, full SSL
	negotiation for connection. The default cache timeout is 600
	seconds
Restrictions	Only administrator-level users can issue this command.

Example usage:

To set the SSL cachetimeout for 7200 seconds:

DES-6500:4#config ssl cachetimeout timeout 7200

Command: config ssl cachetimeout timeout 7200

Success.

DES-6500:4#

show ssl cachetimeout

Purpose	Used to show the SSL cache timeout.
Syntax	show ssl cachetimeout
Description	Entering this command will allow the user to view the SSL cache
	timeout currently implemented on the Switch.
Parameters	None.
Restrictions	None.

Example usage:

To view the SSL cache timeout on the Switch:

DES-6500:4#show ssl cachetimeout

Command: show ssl cachetimeout

Cache timeout is 600 second(s).

DES-6500:4#

187