
xStack
Example usage:
To display the errors of the port 3 of module 1:
Command: show errors ports 1:3
| RX Frames |
| TX Frames |
|
| ||
CRC Error | 19 | Excessive Deferral | 0 |
Undersize | 0 | CRC Error | 0 |
Oversize | 0 | Late Collision | 0 |
Fragment | 0 | Excessive Collision | 0 |
Jabber | 11 | Single Collision | 0 |
Drop Pkts | 20837 | Collision | 0 |
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show utilization
Purpose | Used to display |
Syntax | show utilization [ports cpu] |
Description | This command will display the |
| statistics for the Switch. |
Parameters | cpu – Entering this parameter will display the current cpu |
| utilization of the Switch, as a percentage. |
| ports – Entering this parameter will display the current utilization of |
| all ports on the Switch. |
Restrictions | None. |
|
|
Example usage:
To display the current CPU utilization:
Command: show utilization cpu
| CPU utilization : |
|
|
| Five seconds - 15% | One minute - 25% | Five minutes - 14% |
|
|
| |
|
|
|
|
To display the port utilization statistics: |
|
|
60