
xStack
delete iproute default
Purpose | Used to delete a default IP route entry from the Switch’s IP routing |
| table. |
Syntax | delete iproute default <ipaddr> |
Description | This command will delete an existing default entry from the |
| Switch’s IP routing table. |
Parameters | <ipaddr> - The gateway IP address for the next hop router. |
Restrictions | Only |
|
|
Example usage:
To delete the default IP route 10.53.13.254:
Command: delete iproute default 10.53.13.254
Success.
show iproute
Purpose | Used to display the Switch’s current IP routing table. |
Syntax | show iproute {<network_address>} {[static rip ospf]} |
Description | This command will display the Switch’s current IP routing table. |
Parameters | <network_address> − IP address and netmask of the IP interface |
| that is the destination of the route. The address and mask |
| information can be specified using the traditional format (for |
| example, 10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8). |
| static – Use this parameter to display static iproute entries. |
| rip – Use this parameter to display RIP iproute entries. |
| ospf – Use this parameter to display OSPF iproute entries. |
Restrictions | None. |
|
|
Example Usage:
To display the contents of the IP routing table:
Command: show iproute
Routing Table
IP Address/Netmask | Gateway | Interface | Cost | Protocol |
0.0.0.0 | 10.1.1.254 | System | 1 | Default |
10.0.0.0/8 | 10.48.74.122 | System | 1 | Local |
Total Entries: 2 |
|
|
|
|
|
|
|
|
270