D-Link TM DES-6500 manual Candidates candidateid 1-100 Entering this parameter will

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

show sim

Description	This command will display the current information regarding the
	SIM group on the Switch, including the following:
	SIM Version - Displays the current Single IP Management version
	on the Switch.
	Firmware Version - Displays the current Firmware version on the
	Switch.
	Device Name - Displays the user-defined device name on the
	Switch.
	MAC Address - Displays the MAC Address of the Switch.
	Capabilities – Displays the type of switch, be it Layer 2 (L2) or
	Layer 3 (L3).
	Platform – Switch Description including name and model number.
	SIM State –Displays the current Single IP Management State of the
	Switch, whether it be enabled or disabled.
	Role State – Displays the current role the Switch is taking, including
	Commander, Member or Candidate. A stand-alone switch will
	always have the candidate role.
	Discovery Interval - Time in seconds the Switch will send discovery
	packets out over the network.
	Hold time – Displays the time in seconds the Switch will hold
	discovery results before dropping it or utilizing it.
Parameters	candidates <candidate_id 1-100> - Entering this parameter will
	display information concerning candidates of the SIM group. To
	view a specific candidate, include that candidate’s id number, listed
	from 1 to 100.
	members <member_id 1-32>- Entering this parameter will display
	information concerning members of the SIM group. To view a
	specific member, include that member’s ID number, listed from 1 to
	32.
	group commander_mac <macaddr> - Entering this parameter will
	display information concerning the SIM group of a commander
	device, identified by its MAC address.
	neighbor – Entering this parameter will display neighboring devices
	of the Switch. A SIM neighbor is defined as a switch that is
	physically connected to the Switch but is not part of the SIM group.
	This screen will produce the following results:
	• Port – Displays the physical port number of the commander
	switch where the uplink to the neighbor switch is located.
	• MAC Address – Displays the MAC Address of the neighbor
	switch.
	• Role – Displays the role (CS, CaS, MS) of the neighbor
	switch.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To show the SIM information in detail:

243