Lucent Technologies Host-Based Controller Modem AT AT Commands Reference S-Registers, Ascii

0—255

0 rings

Ring Counter

Host-Based Controller Modem	Data Addendum
AT Command Set	June 15, 1998

AT Commands Reference S-Registers

S-registers generally affect how the AT commands perform. Contents of the registers can be displayed or modified when the modem is in command mode.

To display the value of an S-register:

TYPE:	ATSn? where n is the register number.
PRESS:	Enter
To modify the value of an S-register:
TYPE:	ATSn = r

where n is the register number, and r is the new register value.

	PRESS:	Enter
S0	Auto Answer Ring Number

This register determines the number of rings the modem will count before automatically answering a call. Enter 0 (zero) if you do not want the modem to automatically answer at all. When disabled, the modem can only answer with an ATA command.

Range:

Default:

Units:

S1

This register, Ring Counter, is read only. The value of S1 is incremented with each ring. If no rings occur over a six second interval, this register is cleared.

Range: 0—255

Default: 0

Units: rings

S2 AT Escape Character (user defined)

This register determines the ASCII valued used for an escape sequence. The default is the + character. The escape sequence allows the modem to exit data mode and enter command mode when on-line. Values greater than 127 disable the escape sequence.

Range: 0—255

Default: 43

Units: ASCII

S3Command Line Termination Character (user defined)

This register determines the ASCII values as the carriage return character. This character is used to end command lines and result codes.

Range:	0—127, ASCII d ecimal
Default:	13 (carriage return)
Units:	ASCII

Note: This register value is not stored with &W command.

29 Version 1.0 Lucent Technologies Inc.