Lucent Technologies Host-Based Controller Modem AT specifications Fpr

	Host-Based Controller Modem								Data Addendum
	AT Command Set								June 15, 1998
	AT Fax Commands Reference (continued)
	+FPR=<n>				Select Fax port rate
	This command sets the DTE to DCE fax port rate.
			DTE command			DCE action			Description or notes
•FPR		•	0			Execute •IPR	•	0	Select automatic rate detection
•FPR		•	1			Execute •IPR • 2400			Set DTE-DCE to 2400 bit/s
•FPR		•	2			Execute •IPR	•	4800	Set DTE-DCE rate to 4800 bit/s
•FPR		•	4			Execute •IPR	•	9600	Set DTE-DCE rate to 9600 bit/s
•FPR		•	8			Execute •IPR • 19 200			Set DTE-DCE rate to 19 200 bit/s
•FPR		•	10			Execute •IPR • 38 400			Set DTE-DCE rate to 38 400 bit/s
•FPR		•	18			Execute •IPR • 57 600			Set DTE-DCE rate to 57 600 bit/s
•FPR		•	? (if all values listed above			Report (0,1,2,4,8,10,18)			DCE supports 2400, 4800, 9600, 19 200,
are supported)									38 400
									and 57 600 bit/s
•FPR? (if •IPR				•	0)	Report 0			DTE-DCE rate is automatically detected
•FPR? (if •IFC				•	2400)	Report 1			DTE-DCE rate is 2400 bit/s
•FPR? (if •IFC				•	4800)	Report 2			DTE-DCE rate is 4800 bit/s
•FPR? (if •IFC				•	9600)	Report 4			DTE-DCE rate is 9600 bit/s
•FPR? (if •IFC				•	19 200)	Report 8			DTE-DCE rate is 19 200 bit/s
•FPR? (if •IFC				•	38 400)	Report 10			DTE-DCE rate is 38 400 bit/s
•FPR? (if •IFC				•	57 600)	Report 18			DTE-DCE rate is 57 600 bit/s
•FPR? (all other •IPR settings)						Report 255			255 indicates invalid setting

40 Lucent Technologies Inc. Version 1.0