Lucent Technologies Host-Based Controller Modem AT CallCleared codes from 3.6.4/V.58-1994

Data Addendum		Host-Based Controller Modem
June 15, 1998			AT Command Set
Test and Debug AT Commands (continued)
Table 7 - errorControl Active from 3.5.2/V.58
Value	Description	Implemented
0	Disable/none	X
1	V.42 LAPM	X
2	V.42 Alternative protocol (MNP™)	X
3-7F	Reserved (V.58)
80	MNP10™
81	ECP™ Enhanced Cellular Protocol
82	ETC
82-FF	Reserved for mfgs
Table 8 - compressionActive from 3.2.2/V.58
Value	Description	Implemented
0	None	X
1	V.42bis	X
2-7F	Reserved (V.58)
80	MNP5™	X
81-FF	Reserved for mfgs

Table 9 - Additional callCleared codes (3.6.4/V.58)

Code	Definition	Implemented
1	No Previous call	X
2	Call is still in progress	X
3	Call Waiting signal detected
4	Delayed - see ETS 300 001	X

Table 10 - callCleared codes from 3.6.4/V.58-1994

callCleared: Indicates that the DCE has gone on hook and that the previously existing network connection has been cleared. These values are hexadecimal, converted from decimal in V.58.

Value	Description	Notes	Implemented
0	CauseUnidentified	Call setup issues	X
1-3	See Table 9 above		X
A	NMSinitiatedDialCall	-- Network Management System
B	NMSinitiatedLeasedLineRestoral
C	NMSinitiatedRedial
D	NMSinitiatedDialDisconnect
14	PowerLoss	DCE
15	EquipmentFailure
16	FrontPanelDisconnectRequested
17	FrontPanelLeasedLineRestoral
18	AutomaticLeasedLineRestoral
19	InactivityTimerExpired		X
1E	cct116RestoralRequest	DTE Interface
1F	cct108isOffInhibitsDial
20	cct108turnedOff
28	NoNumberProvided	Line Interface
29	BlacklistedNumber		X

Version 1.0 Lucent Technologies Inc. 27