xStack
config authen_login
authenticated using the local user account database on the Switch.
none – Adding this parameter will require no authentication to access the Switch.
method_list_name – Enter a previously implemented method list name defined by the user. The user may add one, or a combination of up to four (4) of the following authentication methods to this method list:
| tacacs – Adding this parameter will require the user to be |
| authenticated using the TACACS protocol from a remote |
| TACACS server. |
| xtacacs – Adding this parameter will require the user to be |
| authenticated using the XTACACS protocol from a remote |
| XTACACS server. |
| tacacs+ – Adding this parameter will require the user to be |
| authenticated using the TACACS protocol from a remote |
| TACACS server. |
| radius - Adding this parameter will require the user to be |
| authenticated using the RADIUS protocol from a previously |
| configured RADIUS server. |
| server_group <string 15> - Adding this parameter will require |
| the user to be authenticated using a |
| group previously configured on the Switch. |
| local - Adding this parameter will require the user to be |
| authenticated using the local user account database on the |
| Switch. |
| none – Adding this parameter will require no authentication |
| to access the Switch. |
| NOTE: Entering none or local as an authentication |
| protocol will override any other authentication that |
| follows it on a method list or on the default method |
| list. |
Restrictions | Only |
Example usage:
To configure the user defined method list “Trinity” with authentication methods TACACS, XTACACS and local, in that order.
Command: config authen_login method_list_name Trinity method tacacs xtacacs local
Success.
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
157
