xStack
45
COMMAND HISTORY LIST
The command history list commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
Command | Parameters |
? | {<command>} |
|
|
show command_history |
|
|
|
config command_history | <value |
|
|
Each command is listed, in detail, in the following sections.
?
Purpose | Used to display all commands in the Command Line Interface |
| (CLI). |
Syntax | ? {<command>} |
Description | This command will display all of the commands available |
| through the Command Line Interface (CLI). |
Parameters | {<command>} – Entering the question mark with an appropriate |
| command will list all the corresponding parameters for the |
| specified command, along with a brief description of the |
| commands function and similar commands having the same |
| words in the command. |
Restrictions | None. |
|
|
Example usage
To display all of the commands in the CLI:
..
?
clear
clear arptable clear counters clear fdb clear log
config 802.1p default_priority config 802.1p user_priority config 802.1x auth_mode
config 802.1x auth_parameter ports config 802.1x auth_protocol config 802.1x capability ports config 802.1x init
config 802.1x reauth
config access profile profile_id config account
config admin local_enable config all_boxes_id config arp_aging time
325