D-Link TM DES-6500 Config authen parameter responsetimeout, Darren 10.53.13.2, Tacacs 10.53.13.94

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

DES-6500:4#show authen server_group

Command: show authen server_group

Group Name	IP Address	Protocol
radius---------------	---------------	--------
	----------------------------------------
Darren	10.53.13.2	TACACS
tacacs	10.53.13.94	TACACS
tacacs+	----------------------------------------
xtacacs	----------------------------------------

Total Entries : 4

DES-6500:4#

config authen parameter response_timeout

Purpose	Used to configure the amount of time the Switch will wait for a user
	to enter authentication before timing out.
Syntax	config authen parameter response_timeout <int 0-255>
Description	This command will set the time the Switch will wait for a response of
	authentication from the user.
Parameters	response_timeout <int 0-255>- Set the time, in seconds, the Switch
	will wait for a response of authentication from the user attempting to
	log in from the command line interface or telnet interface. An entry of
	0 will denote that the Switch will never time out while waiting for a
	response of authentication. The default setting is 30 seconds.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To configure the response timeout for 60 seconds:

DES-6500:4# config authen parameter response_timeout 60

Command: config authen parameter response_timeout 60

Success.

DES-6500:4#

Example usage:

To configure the response timeout to never time out:

DES-6500:4# config authen parameter response_timeout 0

Command: config authen parameter response_timeout 0

Success.

DES-6500:4#

172