
xStack
Command | Parameters |
config stp priority | <value |
|
|
config stp | {revision_level <int |
mst_config_id |
|
config stp mst_ports | <portlist> instance_id <value |
| 200000000] priority <value |
|
|
show stp |
|
|
|
show stp ports | {<portlist>} |
|
|
show stp instance_id | {<value |
|
|
show stp mst_config id |
|
|
|
Each command is listed, in detail, in the following sections.
enable stp
Purpose | Used to globally enable STP on the Switch. |
Syntax | enable stp |
Description | This command allows the Spanning Tree Protocol to be globally |
| enabled on the Switch. |
Parameters | None. |
Restrictions | Only |
|
|
Example usage:
To enable STP, globally, on the Switch:
DES-6500:4#enable stp
Command: enable stp
Success.
disable stp
| Purpose | Used to globally disable STP on the Switch. |
| Syntax | disable stp |
| Description | This command allows the Spanning Tree Protocol to be globally |
|
| disabled on the Switch. |
| Parameters | None. |
| Restrictions | Only |
|
|
|
Example usage: |
| |
To disable STP on the Switch: |
|
76