D-Link TM DES-6500 manual Show multicastfdb, Show fdb

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

show multicast_fdb

Purpose	Used to display the contents of the Switch’s multicast forwarding
	database.
Syntax	show mulitcast_fdb [vlan <vlan_name 32> mac_address
	<macaddr>]
Description	This command is used to display the current contents of the
	Switch’s multicast MAC address forwarding database.
Parameters	vlan <vlan_name 32> − The name of the VLAN on which the
	MAC address resides.
	mac_address <macaddr> − The MAC address that is present in
	the forwarding database table.
Restrictions	None.

Example usage:

To display multicast MAC address table:

DES-6500:4#show multicast_fdb

Command: show multicast_fdb

	VLAN Name	: default
	MAC Address	: 01-00-5E-00-00-00
	Egress Ports	: 1:1-1:5,1:26,2:26
	Mode	: Static
	Total Entries	: 1
	DES-6500:4#
show fdb
Purpose		Used to display the current unicast MAC address forwarding
		database.
Syntax		show fdb {port <port> vlan <vlan_name 32> mac_address
		<macaddr> static aging_time}
Description		This command will display the current contents of the Switch’s
		forwarding database.
Parameters		port <port> − The port number corresponding to the MAC
		destination address. Enter the corresponding port of the entry to
		delete. The port is specified by listing the lowest slot number and
		the beginning port number on that slot, separated by a colon. For
		example, 1:3 specifies slot number 1, port 3. 2:4 specifies slot
		number 2, port 4.
		<vlan_name 32> − The name of the VLAN on which the MAC
		address resides.
		<macaddr> − The MAC address that is present in the forwarding
		database table.
		static − Displays the static MAC address entries.
		aging_time − Displays the aging time for the MAC address
		forwarding database.
Restrictions		None.

94