
xStack
Command: enable sntp
Success.
disable sntp
Purpose | Disables SNTP server support. |
Syntax | disable sntp |
Description | This will disable SNTP support. SNTP service must be separately |
| configured (see config sntp). |
Parameters | None. |
Restrictions | Only |
|
|
Example:
To stop SNTP support:
Command: disable sntp
Success.
config time
Purpose | Used to manually configure system time and date settings. |
Syntax | config time date <date ddmthyyyy> <time hh:mm:ss> |
Description | This will configure the system time and date settings. These will |
| be overridden if SNTP is configured and enabled. |
Parameters | date – Express the date using two numerical characters for the |
| day of the month, three alphabetical characters for the name of |
| the month, and four numerical characters for the year. For |
| example: 03aug2003. |
| time – Express the system time using the format hh:mm:ss, that is, |
| two numerical characters each for the hour using a |
| the minute and second. For example: 19:42:30. |
Restrictions | Only |
| configured system time and date settings are overridden if SNTP |
| support is enabled. |
|
|
Example usage:
To manually set system time and date settings:
253