Alpine CDE-9845, CDE-9843 Setup, Sound Customizing, 16-EN, SUBW ON Initial setting / SUBW OFF

SETUP

You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, choose from Sound Customizing, Visual Customizing, etc., to make your desired settings.

CDE-9845

BAND Rotary encoder

g f MUTE/SETUP

CDE-9843

BAND Rotary encoder

g f MUTE/SETUP

CDE-9841

BAND 4/3

g f MODE MUTE/SETUP

A typical SETUP procedure is shown in steps 1 to 4 as follows. See below for further information about each SETUP menu.

1Press and hold MUTE/SETUP for at least 2 seconds.

SETUP mode is activated.

2Press g or f to select the desired SETUP menu.

(e.g. Select SUBW)

CDE-9845

ILLUMI → DIMMER → SUBW → CDDA / MP3/CDDA →

SCROLL TYPE → SCROLL → AUX IN →

*1 (AUXILIARY/TV/VCR/GAME) → POWER IC → AREA*2 →

DEMO → ILLUMI

*1 Displayed only when AUX IN is ON.

*2 Refer to “Listening to Radio” (page 6).

CDE-9843

DIM → SUBW → CD-DA / CDDA/MP3 → SCR TYPE → SCR → PWR → AREA*2 → DIM

*2 Refer to “Listening to Radio” (page 6).

CDE-9841

SUBW → PWR → SUBW

3Press BAND to change the setting.

(e.g. Select SUBW ON or SUBW OFF.)

4Press MUTE/SETUP for at least 2 seconds again.

The display returns to normal mode.

Sound Customizing

Subwoofer On and Off

SUBW ON (Initial setting) / SUBW OFF

When the subwoofer is on, perform the steps below to adjust the subwoofer output level.

1Press the Rotary encoder (CDE-9845/CDE-9843 only) or press MODE (CDE-9841 only) repeatedly to select the SUBW mode.

BASS → TREBLE → SUBWOOFER → BALANCE → FADER → DEFEAT → VOLUME → BASS

2To adjust the level, turn the Rotary encoder (CDE-9845/ CDE-9843 only) or press 4 and 3 (CDE-9841 only).

16-EN