Alpine CDE-9841, CDE-9843, CDE-9845 owner manual Installation, 21-EN

Installation

1

No Pressure Here

No Pressure Here

Mounting Sleeve (Included)

Dashboard

3Slide the CDE-9845/CDE-9843/CDE-9841 into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the Detachable Front Panel.

Removal

1 Remove the DETACHABLE FRONT PANEL.

2Insert the optional brackets into the back, along the guides on either side of the unit. The unit can now be removed from the mounting sleeve.

This unit

CDE-9845/CDE-9843/CDE-9841

Remove the Detachable Front Panel (refer to page 5). Slide mounting sleeve from main unit. (see “Removal” on this page).

Slide the mounting sleeve into the dashboard.

•Please examine the installation. Make certain that no external pressure is applied to either the top of the unit or the removable nosepiece.

2		Screw
Hex Nut (M5)
	**	Bolt Stud
Metal
Mounting
Strap	*
		CDE-9845/CDE-9843/
Ground Lead		CDE-9841
	Chassis

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the vehicle’s chassis.

•For the screw marked **, use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDE-9845/CDE- 9843/CDE-9841. Connect all other leads of the CDE- 9845/CDE-9843/CDE-9841 according to details described in the CONNECTlONS section.

Bracket (included)

3 Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

	Face Plate
CDE-9845/		Screws (M5	⋅ 8)

CDE-9843/ (Included)

CDE-9841

Ground Lead

*

Mounting Bracket

•Secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the vehicle's chassis.

21-EN