D-Link TM DES-6500 manual Create snmp user

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

Command	Parameters
	<view_name 32> notify_view <view_name 32>}
delete snmp group	<groupname 32>
show snmp groups
create snmp host	<ipaddr> {v1 v2c v3 [noauth_nopriv auth_nopriv auth_priv]}
	<auth_string 32>
delete snmp host	<ipaddr> <auth_string 32>
show snmp host	<ipaddr>
create trusted_host	<ipaddr>
delete trusted_host	<ipaddr>
show trusted_host	<ipaddr>
enable snmp traps
enable snmp
authenticate_traps
show snmp traps
disable snmp traps
disable snmp
authenticate_traps
config snmp system	<sw_contact>
contact
config snmp system	<sw_location>
location
config snmp system	<sw_name>
name
enable rmon
disable rmon

Each command is listed, in detail, in the following sections.

create snmp user

Purpose	Used to create a new SNMP user and adds the user to an SNMP
	group that is also created by this command.
Syntax	create snmp user <SNMP_name 32> <groupname 32>
	{encrypted [by_password auth [md5 <auth_password 8-16>
	sha <auth_password 8-20>] priv [none des <priv_password 8-
	16>] by_key auth [md5 <auth_key 32-32> sha <auth_key 40-
	40>] priv [none des <priv_key 32-32>]]}
Description	The create snmp user command creates a new SNMP user and
	adds the user to an SNMP group that is also created by this
	command. SNMP ensures:
	Message integrity − Ensures that packets have not been tampered
	with during transit.
	Authentication − Determines if an SNMP message is from a valid
	source.

32