xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

To configure the Switch location for “HQ 5F”:

DES-6500:4#config snmp system_location HQ 5F

Command: config snmp system_location HQ 5F

Success.

DES-6500:4#

config snmp system_name

Purpose

Used to configure the name for the Switch.

Syntax

config snmp system_name {<sw_name>}

Description

The config snmp system_name command configures the name

 

of the Switch.

Parameters

<sw_name> - A maximum of 255 characters is allowed. A NULL

 

string is accepted if no name is desired.

Restrictions

Only administrator-level users can issue this command.

 

 

Example usage:

To configure the Switch name for DES-6500 Chassis Switch”:

DES-6500:4#config snmp system_name DES-6500 Chassis Switch

Command: config snmp system_name DES-6500 Chassis Switch

Success.

DES-6500:4#

enable rmon

Purpose

Used to enable RMON on the Switch.

Syntax

enable rmon

Description

This command is used, in conjunction with the disable rmon

 

command below, to enable and disable remote monitoring

 

(RMON) on the Switch.

Parameters

None.

Restrictions

Only administrator-level users can issue this command.

 

 

Example Usage:

To enable RMON:

50

Page 53
Image 53
D-Link TM DES-6500 manual Enable rmon, Config snmp systemname swname