D-Link TM DES-6500 manual Config traffic controltrap, Show traffic control

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

DES-6500:4# config traffic control_recover 1:1-1:5

Command: config traffic control_recover 1:1-1:5

Success.

DES-6500:4#

config traffic control_trap

Purpose	Used to configure the trap settings for the packet storm control
	mechanism.
Syntax	config traffic control_trap [none storm_occurred
	storm_cleared both]
Description	This command will configure how packet storm control trap
	messages will be used when a packet storm is detected by the
	Switch. This function can only be used for the software traffic
	storm control mechanism (when the action field in the config
	traffic storm_control command is set as shutdown).
Parameters	none – No notification will be generated or sent when a packet
	storm control is detected by the Switch.
	storm _occurred – A notification will be generated and sent when
	a packet storm has been detected by the Switch.
	storm_cleared - A notification will be generated and sent when a
	packet storm has been cleared by the Switch.
	both - A notification will be generated and sent when a packet
	storm has been detected and cleared by the Switch.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To configure notifications to be sent when a packet storm control has been detected and cleared by the Switch.

DES-6500:4# config traffic control trap both

Command: config traffic control trap both

Success.

DES-6500:4#

show traffic control

Purpose	Used to display current traffic control settings.
Syntax	show traffic control {<portlist>}
Description	This command displays the current storm traffic control
	configuration on the Switch.
Parameters	<portlist> − Used to specify port or list of ports for which to display
	ffi	l	i	Thi i	ifi d b li i	h l	i h

100