D-Link TM DES-6500 manual Config routerportsforbidden, Portlist

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

config router_ports

	number and the beginning port number on that slot, separated by
	a colon. Then the highest slot number, and the highest port
	number of the range (also separated by a colon) are specified.
	The beginning and end of the port list range are separated by a
	dash. For example, 1:3 specifies slot number 1, port 3. 2:4
	specifies slot number 2, port 4. 1:3-2:4 specifies all of the ports
	between slot 1, port 3 and slot 2, port 4 − in numerical order.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To set up static router ports:

DES-6500:4#config router_ports default add 2:1-2:10

Command: config router_ports default add 2:1-2:10

Success.

DES-6500:4#

config router_ports_forbidden

Purpose	Used to configure ports as forbidden multicast router ports.
Syntax	config router_ports_forbidden <vlan_name 32> [add delete]
	<portlist>
Description	This command allows you to designate a port or range of ports as
	being forbidden to multicast-enabled routers. This will ensure that
	multicast packets will not be forwarded to this port − regardless of
	protocol, etc.
Parameters	<vlan_name 32> − The name of the VLAN on which the router port
	resides.
	[add delete] - Specifies whether to add or delete forbidden ports to
	the specified VLAN.
	<portlist> − Specifies a range of ports that will be configured as
	forbidden router ports. The port list is specified by listing the lowest
	slot number and the beginning port number on that slot, separated by
	a colon. Then the highest slot number, and the highest port number of
	the range (also separated by a colon) are specified. The beginning
	and end of the port list range are separated by a dash. For example,
	1:3 specifies slot number 1, port 3. 2:4 specifies slot number 2, port
	4. 1:3-2:4 specifies all of the ports between slot 1, port 3 and slot 2,
	port 4 − in numerical order.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To set up forbidden router ports:

147