
xStack
delete arpentry
| table. |
Parameters | <ipaddr> − The IP address of the end node or station. |
| all − Deletes all ARP entries. |
Restrictions | Only |
|
|
Example Usage:
To delete an entry of IP address 10.48.74.121 from the ARP table:
DES-6500:4#delete arpentry 10.48.74.121
Command: delete arpentry 10.48.74.121
Success.
config arp_aging time
Purpose | Used to configure the |
| Switch. |
Syntax | config arp_aging time <value |
Description | This command sets the maximum amount of time, in minutes, that |
| an ARP entry can remain in the Switch’s ARP table, without being |
| accessed, before it is dropped from the table. |
Parameters | time <value |
| value may be set in the range of |
| setting of 20 minutes. |
Restrictions | Only |
|
|
Example Usage:
To configure ARP aging time:
Command: config arp_aging time 30
Success.
show arpentry
Purpose | Used to display the ARP table. |
Syntax | show arpentry {ipif <ipif_name 12> static} |
Description | This command is used to display the current contents of the |
| Switch’s ARP table. |
258