D-Link TM DES-6500 Create snmp community communitystring 32 view viewname, Readonly readwrite

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

Command: show snmp view
Vacm View Table Settings
View Name	Subtree	View Type
--------------------	-------------------------	----------
ReadView	1	Included
WriteView	1	Included
NotifyView	1.3.6	Included
restricted	1.3.6.1.2.1.1	Included
restricted	1.3.6.1.2.1.11	Included
restricted	1.3.6.1.6.3.10.2.1	Included
restricted	1.3.6.1.6.3.11.2.1	Included
restricted	1.3.6.1.6.3.15.1.1	Included
CommunityView	1	Included
CommunityView	1.3.6.1.6.3	Excluded
CommunityView	1.3.6.1.6.3.1	Included

Total Entries: 11

DES-6500:4#

create snmp community

Purpose	Used to create an SNMP community string to define the relationship
	between the SNMP manager and an agent. The community string acts
	like a password to permit access to the agent on the Switch. One or
	more of the following characteristics can be associated with the
	community string:
	An Access List of IP addresses of SNMP managers that are permitted to
	use the community string to gain access to the Switch’s SNMP agent.
	An MIB view that defines the subset of all MIB objects that will be
	accessible to the SNMP community.
	Read-write or read-only level permission for the MIB objects accessible
	to the SNMP community.
Syntax	create snmp community <community_string 32> view <view_name
	32> [read_only read_write]
Description	The create snmp community command is used to create an SNMP
	community string and to assign access-limiting characteristics to this
	community string.
Parameters	<community_string 32> − An alphanumeric string of up to 32 characters
	that is used to identify members of an SNMP community. This string is
	used like a password to give remote SNMP managers access to MIB
	objects in the Switch’s SNMP agent.
	view <view_name 32> − An alphanumeric string of up to 32 characters
	that is used to identify the group of MIB objects that a remote SNMP
	manager is allowed to access on the Switch.
	read_only − Specifies that SNMP community members using the
	community string created with this command can only read the contents
	of the MIBs on the Switch.
	read_write − Specifies that SNMP community members using the
	community string created with this command can read from and write to
	the contents of the MIBs on the Switch.
Restrictions	Only administrator-level users can issue this command.

37