Toshiba DKT3000 manual DSS Console, DSS Buttons, Features

DADM/DSS Console DSS Console

DSS Console

The Direct Station Selection (DSS) console operates alongside of a digital telephone to provide 60 additional buttons. The 3000-series telephone requires

a3000-series DSS; the 2000-series telephone requires a 2000-series DSS. An example of the DDSS3060 is shown right. The DDSS2060 (not shown) looks similar and has the same button/LED functions.

The buttons can be programmed as DSS, outside Line, All Call Page, Night Transfer, and Station or System Speed Dial. LEDs on the DSS light or flash red or green, depending on the status.

Note Button numbers in the above figure are examples only.

DSS Buttons

DSS buttons can appear on both the DADM and DSS Console. Each DSS button is associated with a

209	219	229	239
208	218	228	238
207	217	227	237
206	216	226	236
205	215	225	235
204	214	224	234
203	213	223	233
202	212	221	232
201	211	221	231
200	210	220	230

249 NT

248 AC

247 257

246 256

245 255

244 254

243 253

242 252

241251

240250

particular station in your telephone system. DSS buttons can transfer an outside call to the associated station or make a direct call to the associated station.

2039

The DSS LED lights steady red when the station associated with the DSS button is ringing, busy on a call, or when the associated station is idle, but all appearances of the station’s extensions are busy or in-use by other stations. When the associated DSS button is in the Do Not Disturb mode, the LED blinks red at a slow rate.

DSS buttons cannot call station Phantom extension numbers, Distributed Hunt Group Directory Numbers, or ACD Groups. DSS buttons may be configured as One Touch Buttons that may be programmed to call these destinations.

Features

The LED colors described in this section apply to the DADM3020 and DDSS3060. Described Flash/ Recall conditions apply to all DSS console models and the DADM.

Strata CTX DKT3000/2000-Series Digital Telephone October 2002 81