Strata CTX DKT3000/2000-Series Digital Telephone October 2002 83
DADM/DSS Console DSS Console
Call Transfer with Camp-on
You can transfer a call to a busy station from either a DSS console or an DADM. Use the DSS to
transfer the call, even though the DSS LED associated with the station you are “transferring to” is red.
➤To transfer call to a busy station
1. Press DSS corresponding to the busy station to be called.
You may hear a busy tone. The original caller is placed automatically on hold. The Line or extension
LED flashes green at double the on-hold rate, and the DSS LED remains steady red.
2. Hang up.
The call rings the called station once with the camp-on tone. While the called station is receiving this
tone, the Line LED flashes green (on-hold rate) or if you are on a extension button, it goes idle. The
[DSS] LED remains steady red.
When the called station answers the transferred call, the Line LED becomes steady red. The [DSS]
LED remains steady red.
Note If the busy station is in the Do Not Disturb mode, the call will not transfer, but will recall your
telephone immediately.
If the call is not answered after a specified Recall time set in system programming, camp-on is
cancelled and the transferred call rings back.
Call Answering (Outside Line)
If your DADM or DSS console is equipped with a Line button, you can answer outside line calls
from the DADM or DSS console as you would from a digital telephone.
➤To answer an incoming outside line call to a DADM or DSS Console, press the flashing Line.
Speed Dial
Your DADM or DSS console may be equipped with SD (Speed Dial) buttons that can be programmed
to dial telephone numbers or to access features. SD buttons on either the DADM or DSS console
function like SD buttons on digital telephones.