Distinctive Ringing

Advanced Operation

 

 

Distinctive Ringing

1.Press #9876 to enter User Programming Mode.

2.Press a Line button. The Line LED is steady green.

Note The INT key should be pressed. “External Call” will appear in the LCD display. Press the HOLD button to toggle between Internal and External setting.

3.Enter one of the following ten distnctive ring tones.

01 ~ 02 Internal ring tones

11 ~ 18 External ring tones

Note Any of the ring tone options can be set for either Internal or External calls.

4.Press the HOLD key to store.

5.Lift handset to return to the idle state.

Do Not Disturb

If your station is in Do Not Disturb (DND) mode, internal, external and transferred calls do not ring your station and Off-hook Call Announce calls are denied. You can continue to make calls while in the DND mode. When originating a call in DND mode, you will hear a short burst of interrupted dial tone followed by continuous dial tone. You can start dialling at any time during either tone.

If you put your Primary extension into DND mode, all calls to that telephone are rejected. If your extension is set for Call Forward-Busy or Call Forward-Busy/No Answer, the call is redirected to the forwarding destination immediately.

If you put an extension other than the Primary extension into DND, only calls to that extension on your telephone will be blocked. Appearances of that extension on other telephones continue to ring.

40

Strata CTX DKT3000/2000-Series Digital Telephone October 2002

Page 53
Image 53
Toshiba DKT3000 manual Distinctive Ringing, Do Not Disturb