Strata CTX DKT3000/2000-Series Digital Telephone October 2002 A-5
Notes to Users Type Approval
Step 3: Type Approval
Toshiba Information Systems (UK), Ltd, (TIU), hereby declares that the Strata CTX product complies
with the requirements of the EC Directive 1999/5/EC, (aka Radio & Telecommunications Terminal
Equipment directive). A manufacture’s Declaration under this Directive allows connection to the
relevant Public Network Services and the right to place the Product on the market.
The Strata CT is classified as “Call Routing Apparatus” it is intended to be connected to the various
Public Telecommunications Network Services for the purpose of generating and terminating “calls”.
Table A-2 below lists the intended purposes of all the system interfaces.
The system must be installed in accordance with BS6701 parts 1 and 2, the latest issue shall apply.
Toshiba Information Systems claim approval to OFTEL general variation NS/V/1235/P/100020. The
information contained in this paragraph supports Toshiba’s claim:
The following features require the interconnection of 2 or more exchange lines.
Multi-party conferencing
Call Forward External*
Translation of Un-used Extension numbers*
DISA*
*Warning! These features can allow an Incoming callers access to an outgoing
exchange line. There is an engineering programming parameter which can
disable these features. In addition the DISA feature can be “password”
protected. USERS SHOULD BE AWARE THAT THESE FEATURES CAN BE
USED FOR FRAUDULENT PURPOSES. Please consult your supplier to
ensure any necessary security measures are enabled.
Table A-2
Interface Type Network Service
PCOU2F/RCOU Analogue Loop Calling Unguarded Lines. PD7002
RPTU1F/RPTU2F Euro ISDN30 service. Approved to TBR 4 & TBR12.
RBSU1A & RBSU2A Euro ISDN2 service. Approved to TBR 3.
PACU2F/PACU3F Analogue 4 wire Private Circuits, uses AC15 signalling.
Approved to TBR 17.
PEMU2F/REMU Analogue 4 wire Private Circuits, uses DC5 signalling.
Approved to TBR 17.
Note RPTU1F does not support QSig without the correct firmware.