84 Strata CTX DKT3000/2000-Series Digital Telephone October 2002
DSS Console DADM/DSS Console
Paging
You can make an announcement page to a group of telephone speakers selected in system
programming with All Call Page on the DSS console. SD (if programmed) on either the DSS
console or the DADM can be used for page announcements. See “All Call Page” on page48.
Call Forward Override (DSS Override)
Either the DSS buttons on your DSS console or the associated telephone can be set in system
programming to ring stations that are in the Call Forward mode, instead of being forwarded. Usually
the console’s telephone is the unit activated to perform this function. Among other applications, this
feature can be used to notify a person who forgets to deactivate the Call Forward feature after
returning to the office.
To override call forward with the console’s associated telephone
1. Press Cnf/Trn or extension button.
2. Dial the station number set for call forward.
Make the call as you would from any other station. This procedure assumes your station has a typical
program setting.
To override call forward with your DSS Console
Press the station DSS button set for Call Forward.
Night Transfer Button
This button enables a pre-programmed station to place the system into Day, Day2 or Night Mode. See
your System Administrator for information on the settings for Day, Day2 or Night Mode. Usually,
these modes will transfer calls to a designated location or voice mailbox, depending on programming.
1. Press Night Transfer.
2. Press the desired Mode number:
Press 1 for Day Mode (LED remains off).
Press 2 for Day2 Mode (LED flashes red).
Press 3 for Night Mode (LED is solid red).