D-Link TM DES-6500 Config stp instanceid value 1-15 addvlan removevlan, Vidlist, Instanceid

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

Example usage:

To create a spanning tree instance 2:

DES-6500:4#create stp instance_id 2

Command: create stp instance_id 2

Success.

DES-6500:4#

config stp instance_id

Purpose	Used to add or delete an STP instance ID.
Syntax	config stp instance_id <value 1-15> [add_vlan remove_vlan]
	<vidlist>
Description	This command is used to map VIDs (VLAN IDs) to previously
	configured STP instances on the Switch by creating an instance_id. A
	STP instance may have multiple members with the same MSTP
	configuration. There is no limit to the number of STP regions in a
	network but each region only supports a maximum of 16 spanning tree
	instances (one unchangeable default entry). VIDs can belong to only
	one spanning tree instance at a time.
	Note that switches in the same spanning tree region having the same
	STP instance_id must be mapped identically, and have the same
	configuration revision_level number and the same name.
Parameters	<value 1-15>- Enter a number between 1 and 15 to define the
	instance_id. The Switch supports 16 STP regions with one
	unchangeable default instance ID set as 0.
	add_vlan – Along with the vid_range <vidlist> parameter, this
	command will add VIDs to the previously configured STP
	instance_id.
	remove_vlan – Along with the vid_range <vidlist> parameter,
	this command will remove VIDs to the previously configured STP
	instance_id.
	<vidlist> – Specify the VID range from configured VLANs set
	on the Switch. Supported VIDs on the Switch range from ID
	number 1 to 4094.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To configure instance ID 2 to add VID 10:

DES-6500:4#config stp instance_id 2 add_vlan 10

Command : config stp instance_id 2 add_vlan 10

Success.

DES-6500:4#

Example usage:

To remove VID 10 from instance ID 2:

81