D-Link TM DES-6500 manual Show authstatistics ports portlist all

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

To display the current authentication session statistics for port 16:

DES-6500:4#show auth_session_statistics ports 1:16

Command: show auth_session_statistics ports 1:16

Port number : 1:16
SessionOctetsRx				0
SessionOctetsTx				0
SessionFramesRx				0
SessionFramesTx				0
SessionId
SessionAuthenticMethod					Remote Authentication Server
SessionTime				0
SessionTerminateCause					SupplicantLogoff
SessionUserName					Trinity
		Quit			Next Page		Next Entry	All
CTRL+C	ESC		SPACE			Enter

show auth_statistics

Purpose	Used to display the current authentication statistics.
Syntax	show auth_statistics {ports <portlist> all]}
Description	The show auth_statistics command is used to display the
	current authentication statistics of the Switch on a per port basis.
Parameters	ports <portlist> − Specifies a range of ports. The port list is
	specified by listing the lowest slot number and the beginning port
	number on that slot, separated by a colon. Then the highest slot
	number, and the highest port number of the range (also
	separated by a colon) are specified. The beginning and end of the
	port list range are separated by a dash. For example, 1:3
	specifies slot number 1, port 3. 2:4 specifies slot number 2, port
	4. 1:3-2:4 specifies all of the ports between slot 1, port 3 and slot
	2, port 4 − in numerical order.
	all – Specifies that all ports will be viewed.
Restrictions	None.

Example usage:

To display the current authentication statistics for port 16 of module 1:

207