D-Link TM DES-6500 manual Delete snmp group groupname

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

create snmp group

	be encrypted.
	read_view – Specifies that the SNMP group being created can
	request SNMP messages.
	write_view – Specifies that the SNMP group being created has
	write privileges.
	<view_name 32> − An alphanumeric string of up to 32 characters
	that is used to identify the group of MIB objects that a remote
	SNMP manager is allowed to access on the Switch.
	notify_view − Specifies that the SNMP group being created can
	receive SNMP trap messages generated by the Switch’s SNMP
	agent.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To create an SNMP group named “sg1:”

DES-6500:4#create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1

Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1

Success.

DES-6500:4#

delete snmp group

Purpose	Used to remove an SNMP group from the Switch.
Syntax	delete snmp group <groupname 32>
Description	The delete snmp group command is used to remove an SNMP
	group from the Switch.
Parameters	<groupname 32> − An alphanumeric name of up to 32 characters
	that will identify the SNMP group to be deleted.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To delete the SNMP group named “sg1”.

DES-6500:4#delete snmp group sg1

Command: delete snmp group sg1

Success.

DES-6500:4#

41