xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

config command_prompt

 

Switch.

 

default – Entering this parameter will return the command

 

prompt to its original factory default setting.

Restrictions

The reset command will not alter the configured command

 

prompt, yet the reset system command will return the command

 

prompt to its original factory default setting.

 

Only administrator-level users can issue this command.

Example usage:

To configure the command prompt:

DES-6500:4#config command prompt Trinity

Command: config command prompt Trinity

Success.

Trinity#

config greeting_message

Purpose

Used to configure the greeting message or banner for the

 

opening screen of the Command Line Interface.

Syntax

config greeting_message {default}

Description

This command is used to configure the greeting message or

 

login banner for the opening screen of the CLI.

Parameters

default – Adding this parameter will return the greeting command

 

to its original factory default configuration.

Restrictions

The reset command will not alter the configured greeting

 

message, yet the reset system command will return the

 

greeting message to its original factory default setting.

 

The maximum character capacity for the greeting banned is 6

 

lines and 80 characters per line. Entering Ctrl+W will save the

 

current configured banner to the DRAM only. To enter it into the

 

FLASH memory, the user must enter the save command.

 

Only administrator-level users can issue this command.

 

 

Example usage:

To configure the greeting message:

23

Page 26
Image 26
D-Link TM DES-6500 manual Config greetingmessage default