
xStack
Max Age | : 20 |
TX Hold Count | : 3 |
Forwarding BPDU | : Enabled |
Loopback Detection | : Enabled |
LBD Recover Time | : 60 |
| |
|
|
show stp ports
Purpose | Used to display the Switch’s current instance_id configuration. |
Syntax | show stp ports <portlist> |
Description | This command displays the STP Instance Settings and STP |
| Instance Operational Status currently implemented on the Switch. |
Parameters | <portlist> − Specifies a range of ports to be displayed. The port |
| list is specified by listing the lowest slot number and the beginning |
| port number on that slot, separated by a colon. Then the highest |
| slot number, and the highest port number of the range (also |
| separated by a colon) are specified. The beginning and end of the |
| port list range are separated by a dash. For example, 1:3 |
| specifies slot number 1, port 3. 2:4 specifies slot number 2, port |
| 4. |
| 2, port 4 − in numerical order. |
Restrictions | None. |
|
|
Example usage:
To show stp ports 1 through 9 on switch one:
Command: show stp ports
MSTP Port Information |
|
|
|
| ||
|
|
|
|
| ||
Port Index | : 1:1 , | Hello Time: 2 /2 , |
| Port STP enabled , LBD: No | ||
External PathCost : Auto/200000 , Edge Port : No /No , P2P : Auto /Yes | ||||||
Msti | Designated Bridge | Internal PathCost | Prio | Status | Role | |
| ||||||
0 | 8000/0050BA7120D6 | 200000 | 128 | Forwarding | Root | |
1 | 8001/0053131A3324 | 200000 | 128 | Forwarding | Master |
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
show stp instance_id
Purpose | Used to display the Switch’s STP instance configuration |
Syntax | show stp instance_id <value |
Description | This command displays the Switch’s current STP Instance |
| Settings and the STP Instance Operational Status. |
Parameters | <value |
| instance_id on the Switch. An entry of 0 will display the STP |
86