
xStack
To show the DHCP relay configuration:
Command: show dhcp_relay
DHCP/BOOTP Relay Status |
|
| : Enabled | ||
DHCP/BOOTP Hops Count Limit |
|
| : 2 | ||
DHCP/BOOTP Relay Time Threshold |
| : 23 | |||
DHCP Relay Agent Information Option 82 | State | : Enabled | |||
DHCP Relay Agent Information Option 82 | Check : Enabled | ||||
DHCP Relay Agent Information Option 82 | Policy : Replace | ||||
Interface | Server 1 | Server 2 | Server 3 | Server 4 | |
System | 10.58.44.6 |
|
|
|
|
Example usage:
To show a single IP destination of the DHCP relay configuration:
Command: show dhcp_relay ipif System
Interface | Server 1 | Server 2 | Server 3 | Server 4 |
System | 10.58.44.6 |
|
|
|
enable dhcp_relay
Purpose | Used to enable the DHCP/BOOTP relay function on the switch. |
Syntax | enable dhcp_relay |
Description | This command is used to enable the DHCP/BOOTP relay function on the |
| switch. |
Parameters | None. |
Restrictions | Only |
|
|
Example usage:
To enable DHCP relay:
DES-6500:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
281