
xStack
Command: delete access_profile profile_id 1
Success.
show access_profile
Purpose | Used to display the currently configured access profiles on the |
| Switch. |
Syntax | show access_profile {profile_id <value |
Description | The show access_profile command is used to display the |
| currently configured access profiles. |
Parameters | profile_id <value |
| used to identify the access profile that will be viewed with this |
| command. This value is assigned to the access profile when it is |
| created with the create access_profile command. |
| Entering this command without the profile_id parameter will |
| command the Switch to display all access profile entries. |
Restrictions | Only |
|
|
Example usage:
To display all of the currently configured access profiles on the Switch:
Command: show access_profile
Access Profile Table |
|
Access Profile ID: 1 | TYPE : Ethernet |
======================================================================
MASK Option :
VLAN | 802.1p |
|
| ||
Access ID : 1 | Mode: Permit(replaced) priority: 1 | |
Ports: 1:1 |
| |
| ||
Trinity | 1 |
|
======================================================================
Access Profile ID: 2TYPE : IP
======================================================================
MASK Option : Protocol ID
Access ID : 2 | Mode: Deny |
Ports: 1:2 |
|
|
226