D-Link TM DES-6500 manual Config route redistribute dst rip src, Metric value

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

config route redistribute dst ospf src

• Type-1 calculates the metric (for RIP to OSPF) by adding the destination’s interface cost to the metric entered in the Metric field.

• Type-2 uses the metric entered in the Metric field without change. This field applies only when the destination field is OSPF.

	metric <value 0-16777214>− Allows the entry of an OSPF interface
	cost. This is analogous to a Hop Count in the RIP routing protocol.
Restrictions	Only administrator-level users can issue this command.

Routing information source − RIP: the Static Route table, and the Local interface routing information. Routing information will be redistributed to OSPF. The following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed.

Route Source	Metric	Metric Type
RIP	0 to 16777214	mettype 1
		mettype 2
Static	0 to 16777214	mettype 1
		mettype 2
Local	0 to 16777214	mettype 1
		mettype 2

Allowed Metric Type combinations are mettype 1 or mettype 2. The metric value 0 above will be redistributed in OSPF as the metric 20.

Example Usage:

To configure route redistributions:

DES-6500:4#config route redistribute dst ospf src all metric 2

Command: config route redistribute dst ospf src all metric 2

	Success.
	DES-6500:4#
config route redistribute dst rip src
Purpose		Used configure route redistribution settings for the exchange of
		RIP routes to OSPF routes on the Switch.
Syntax		config route redistribute dst rip src [local static ospf [all
		internal external type_1 type_2 inter+e1 inter+e2]]
		{metric <value 0-16>}
Description		Route redistribution allows routers on the network that are running
		different routing protocols to exchange routing information. This is

accomplished by comparing the routes stored in the various router’s routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol. The Switch can redistribute routing information between the OSPF and RIP routing protocols to all routers on the network that are running OSPF or RIP. Routing information entered into the Static Routing Table on the local switch is also redistributed.

274