D-Link TM DES-6500 manual Delete accessprofile, Specified for the IPv6 access profile

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

config access_profile profile_id (ipv6)

used to determine the CoS queue to which packets are forwarded to. Once this field is specified, packets accepted by the Switch that match this priority are forwarded to the CoS queue specified previously by the user.

• {replace_priority} − Enter this parameter to re-write the 802.1p default priority of a packet to the value entered in the Priority field, which meets the criteria specified previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-written to its original value before being forwarded by the Switch.

	deny – Specifies that packets that match the access profile are not
	permitted to be forwarded by the Switch and will be filtered.
	delete access_id <value 1-65535> − Use this command to delete a
	specific rule from the IPv6 profile. Up to 65535 rules may be
	specified for the IPv6 access profile.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To configure a previously created access profile based on IPv6 classification:

DES-6500:4# config access_profile profile_id 4 add access_id 1 ipv6 class 1 flowlabel 0xABCD port 1:4 deny

Command: config access_profile profile_id 4 add access_id 1 ipv6 class 1 flowlabel 0xABCD port 1:4 deny

Success.

DES-6500:4#

delete access_profile

Purpose	Used to delete a previously created access profile.
Syntax	delete access_profile profile_id <value 1-8>
Description	The delete access_profile command is used to delete a
	previously created access profile on the Switch.
Parameters	profile_id <value 1-8>− Enter an integer between 1 and 8 that is
	used to identify the access profile that will be deleted with this
	command. This value is assigned to the access profile when it is
	created with the create access_profile command.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To delete the access profile with a profile ID of 1:

225