D-Link TM DES-6500 manual Config authen application, Login enable default methodlistname string

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

show authen_enable

	refers to server groups defined by the user. Built-in Group
	refers to the TACACS/XTACACS/TACACS+ and RADIUS
	security protocols which are permanently set in the Switch.
	Keyword refers to authentication using a technique INSTEAD
	of TACACS/XTACACS/TACACS+ and RADIUS which are
	local (authentication through the local_enable password on
	the Switch) and none (no authentication necessary to access
	any function on the Switch).
Parameters	default – Entering this parameter will display the default method list for
	users attempting to gain access to Administrator level privileges on the
	Switch.
	method_list_name <string 15> – Enter an alphanumeric string of up to
	15 characters to define the given method list to view.
	all – Entering this parameter will display all the authentication login
	methods currently configured on the Switch.
Restrictions	None.

Example usage:

To display all method lists for promoting user level privileges to administrator level privileges.

DES-6500:4#show authen_enable all

Command: show authen_enable all

Method List Name	Priority	Method Name Comment
----------------	--------	---------------	------------------
Permit	1	tacacs+	Built-in Group
	2	tacacs	Built-in Group
	3	Darren	User-defined Group
	4	local	Keyword
default	1	tacacs+	Built-in Group
	2	local	Keyword

Total Entries : 2

DES-6500:4#

config authen application

Purpose	Used to configure various applications on the Switch for
	authentication using a previously configured method list.
Syntax	config authen application [console telnet ssh http all]
	[login enable] [default method_list_name <string 15>]
Description	This command is used to configure switch configuration applications
	(console, telnet, ssh, web) for login at the user level and at the
	administration level (authen_enable) utilizing a previously configured
	method list.
Parameters	application – Choose the application to configure. The user may
	choose one of the following four applications to configure.
	console – Choose this parameter to configure the
	command line interface login method.

163