Bosch Appliances LTC 0620, LTC 0495 Video Motion Detection VMD submenu, Defaults submenu

DinionXF Installation Manual

EN 21

menu, the current area is displayed with the upper left corner flashing. The flashing corner of the image can be moved with the Up, Down, Left, Right arrow keys. Pressing the Select key moves the flashing cursor to the opposite corner, which can now be moved. Pressing Select again freezes the area and exits the area menu.

Video Motion Detection (VMD) submenu

Function	Selection	Description
VMD	OFF, SIL, OSD	When VMD is enabled and the camera can
		generate SIL (silent) or OSD (monitor alarm
		generates on-screen message) motion alarms.
AREA	1, 2, 3, 4,	• It is possible to set 4 motion sensitive areas (per
	Select submenu	MODE).
		• Press SELECT to enter the area set-up menu.
ACTIVE	ON, OFF	Every area can be enabled individually by
		selecting YES.
MOTION	Press SELECT to	Indicates the peak of measured motion in the
	reset indicator	selected area
SENS		Use the LEFT/RIGHT keys to set the SENSitivity
		for motion to the desired level. Motion above this
		level triggers alarm.
EXIT		Return to Mode menu

Note

If VMD areas overlap, motion is only detected in the area with the lowest sequence number.

Defaults submenu

Function

MODE DEFAULTS

EXIT

Selection

Description

Select to restore the factory defaults. A confirmation screen appears. Allow 5 seconds for the camera to optimize the picture after a mode reset.

Return to Mode menu

Bosch Security Systems 2004-01 V1.0