DinionXF Installation Manual
EN 22
Installer Settings
Install menu
Function | Selection | Description |
LENS | Select submenu | Select to optimize camera lens combination |
WIZARD |
|
|
|
|
|
I/O | Select submenu | Select to access the I/O functions |
SYNC | Select submenu | Select to access the synchronization functions |
|
|
|
CAMERA ID | Select submenu | Select to access ID menu |
DEFAULTS | Select submenu | Return all settings for all modes to factory defaults |
|
|
|
EXIT |
| Exit the menu |
|
|
|
Install lens wizard submenu
Function | Selection | Description |
LENS TYPE | AUTO, MANUAL, | In AUTO mode the camera auto detects the type |
| DCIRIS, VIDEO | of lens used or force the camera into a mode. |
|
|
|
DETECTED |
| If the LENS TYPE detection is in AUTO, the |
|
| detected lens type will be shown. |
SET BACK |
| Select to force lens to its maximum opening. After |
FOCUS |
| focusing the lens the object of interest remains in |
NOW |
| focus in bright and low light conditions. |
|
|
|
SET LVL |
| (Video iris lenses only). The level detector |
|
| indicator must be set to the center by adjusting |
|
| the level potentiometer on the lens, to obtain the |
|
| best picture performance. |
EXIT |
| Return to the INSTALL menu |
|
|
|
Adjustment procedure
1.Unlock the back focus locking button.
2.Access the Lens Wizard menu.
3.SET BACK FOCUS NOW is highlighted in the menu.
4.Turn the back focus adjustment as required.
5.Lock the back focus locking button.
6.Exit the menu.
Bosch Security Systems